AD SG-40 UNINSULATED

SLIDING JOINERY SYSTEM

Aluminum profiles are produced from AIMgSi 0, 5 - F22 alloy and as per 12020 Standards.

Physical Properties:

Density 2,71 kg /cm3
Modulus of Elasticity 70 kN /mm2
Resistance 20° 33 n Q .m
Melting Point 600 - 655 °
Coefficient of Expansion 20 - 100° C μ ° C

Mechanical Properties

Limit of Elasticity 190 MPa
Tensile stress 220 MPa
Hardness 67 Brinell
Elongation % 10

Feasible Sliding joinery types: 2, 3, 4, 6-wing Sliding joinery types are feasible. Minimal appearances are ensured in the architecture by hidding wing profile by glass bonding technique.

Weatherstrip: All weatherstrips are EPDM.

Usable Glass Thickness: 40 MM

Depth: Standard frame depth is 62 mm and 3-rail frame is 113 mm. Wing depth is 40 mm.

Wall thickness: 1,5 mm dir.

Water discharge: All profiles have water discharge system.

Rail: Rail is designed alternatively as aluminum and stainless.

Accessories: Key-keyless built-in or espagnolette handle, Pvc joinery channel adaptor and pvc joinery accessories can be used.

Fittings: Frame corner joints are pressed by using press angle block fittings.